Menu
You are here:
LMS Drywall Partition Stud And Track Production Line is mainly used for the production of drywall partition studs and tracks. The full production line includes a manual decoiler, roll forming machine, flying cut-off device, run-out table, and control system. The maximum production speed from decoiling to discharging could be about 100 meters per minute. Other relevant metal ceiling machines could be customized as well, welcome to send samples or drawings for customization.
Stud And Track Roll Forming Machine Machine Main Specification:
1. Material: G.I. Coil / CR Coil
2. Material Thickness: According To Customer’s Requirement
3. Profile Width: According To Customer’s Requirement
4. Profile Height: According To Customer’s Requirement
5. Whole Production Line Speed: 60 – 70 Meters / Minute, Could Be Up To 100 Meters Per Minute.
Drywall Metal Stud And Track Making Machine Production Process:
Material Coil – Decoiling – Roll Forming (- Flying Punching) – Flying Cutting Off – Finished Profile.
Steel Stud & Track Forming Machine Composition Of Complete Production Line:
| NO. | Equipment | Specification | Qty. |
| 1 | Manual Decoiler | (1) Inner Diameter: Ø 460 – 510 MM (2) Loading Capacity: 1000 KGS (3) Manual Operating Type: Manual Expansion To Tighten The Coil |
1 Unit |
| 2 | Roll Forming Machine | (1) Quantity Of Rollers: 12 Groups (2) Roller’s Material: Cr12 Steel, Heat Treatment, Quenched (3) Roller’s Surface Treatment: Polished (4) Roller’s Main Shaft: Ø 40 MM, 40 Cr Steel, Quenched & Heat Treatment (5) Bearing: HRB Bearing, Best In China (6) Machine Side Wall: 25 MM (7) Machine Base: Welded By 80 Square Pipe (8) Driving Method: Chain & Gear Or Gearbox (9) Coolant System: Equipped |
1 Unit |
| 3 | Flying Cut-Off Device | (1) Hydraulic Pump Stand: 1 Set, Auto Start / Stop (2) Hydraulic Cut Modular: 1 Set (3) Modular Material: Cr12Mov (CN Standard) / SKD11 (JP Standard) (4) Length Tolerance: ± 1.0 MM (5) TBI Linear Guideway & Ball Screws: 1 Set (6) Hydraulic Components: Taiwanese (7) Hydraulic Overload Protection Setting: Maxi. & Mini. Pressure, Pump Stand & Forming Machine Stops & Starts, With Wind Coolant System, Filter Function |
1 Unit |
| 4 | Run-Out Table | / | 1 Set |
| 5 | Control System | (1) Controller: Motion Tracing Controller, Single Axis (2) Touchable Screen: 7” Color Screen, WEINVIEW (3) Encoder: Omron, Japanese (4) Button / Knob: Schneider, France (5) Speed Control: Frequency Converter (6) Power Supplier: 380 V, 50 HZ, 3 Phs; Customized |
1 Set |
Please send us roll forming profile with specifications, thickness and other processing requirements for our customized machine.If you need standard machine, please send us the model you want.
LMS International Limited
Tel:+86-20-8731 9590
Fax: +86-20-87319225
E-mail: sales@lmsmachinery.com
Add: 20AB, Zhongqiao Building, NO.76 Xianlie Middle Road, Yuexiu District, Guangzhou, China.
