Something about Metal Ceiling Tile Cleaning and Drying Machine

1. The advantage of using a metal ceiling plate cleaning machine over manual cleaning
   (1) it is saving labor costs and saving time
   (2) The cleaning effect is not the same, the traditional cleaning method will miss the invisible corner.
   (3) The cleaning speed is fast and efficient
   (4) This machine uses spray roller brushes to clean the upper and lower sides of the ceiling plate, which are evenly cleaned, and every part is cleaned in place.
   (5) There are 3 sets of water tanks to clean the ceiling plate, and the number of water tanks can be increased according to customer needs.
2. The oil on the upper and lower surfaces of the aluminum plate is not clean, how to deal with it?
   There are three reasons why the cleaning effect is not good.
   (1) There are not enough cleaning water tanks, and if more water tanks are used, the ceiling plate will be cleaner.
   (2) Use hot water to remove oil stains.
   (3) Use an oil cleaning agent to decompose oil stains.
3. After the aluminum plate is cleaned, can it be dried completely?
   After the aluminum plate is washed by the cleaning machine, it comes into a spray washing room and uses washing cotton ( sponge roller) to absorb water on the upper and lower surfaces of the aluminum plate. there is nearly no water or water mist on the surface of the plate after this step, but slightly damp, and then goes through a 100-degree high-temperature oven to dry both sides to achieve dehumidification.
4. Can the aluminum plate be cleaned after punching?
   When punching the aluminum plate, it is necessary to oil the plate or the drilling head, so after cleaning, it is necessary to degrease the surface of the punched plate. Both the punched plate and the aluminum plate can be cleaned, as long as it is a flat plate products.
5. Can thick aluminum workpieces or aluminum accessories be cleaned?
   If the surface of the aluminum plate is flat, you can use the flat cleaning machine.
   if it is a specially shaped aluminum material, you can use the ultrasonic cleaning machine.
6. What is the structure of the cleaning machine?
   The whole machine is made of 201 stainless steel, including the frame, water tank, funnel, sealing plate, shield sheet metal, etc.
7. How to clean the sewage in the water tank of the cleaning machine? Is there an automatic water replenishment function?
   The design of the water tank of the cleaning machine is relatively complicated and can be designed according to the needs of customers. The sewage treatment method of the water tank is as below:
   (1) Open the drain valve of the water tank and start to drain the water. When the water is drained, use a broom to clean it. Let more sewage be discharged.
   (2) After draining the water, open the water inlet valve, do not close the drain valve, and let the staff discharge while cleaning.
   (3) After cleaning, close the drain valve and continue to open the water inlet valve to discharge water. When the water surface reaches 3/4 of the water valve, close the water inlet valve, indicating that the sewage treatment of the water tank is finished.
8. Does the cleaning machine clean one side or both sides?
   The cleaning method of the ceiling cleaning machine is to use a double-sided roller brush to clean, which can easily clean the upper and lower sides of the plate.
9. How long is the production cycle of the metal ceiling plate cleaning machine?
   The production cycle is about 15-20 working days. The production cycle of customized cleaning machines need according to customer needs, normally the cycle is about 30-35 working days.

Machine Structure:

Machine Photos: